How to force fsck to check filesystem after system reboot on Linux

Categories:  linux
Labels:  OS

This article will explain a procedure on how to force fsck to perform a filesystem check on the next system reboot or force filesystem check for any desired number of system reboots whether it is root or non-root mount point.

Let’s start with discussion about some tools which can be used to obtain filesystem information and configurations which control filesystem check after system reboot. The tool which we are going to discuss is tune2fs filesystem managing utility. Using tune2fs we can export some important information related to filesystem health check.

The following command will tell as when was the last time the filesystem /dev/sdX was checked:

Any commands with a # at the start means “as root”.

# tune2fs -l /dev/sdbX | grep Last\ c
Last checked:             Sun Dec 13 09:14:22 2015

Another useful information which can be retrieved by tune2fs command relates to how many times our /dev/sdX filesystem was mounted:

# tune2fs -l /dev/sdbX | grep Mount
Mount count:              157

And lastly how many mounts are allowed to pass before filesystem check is forced:

# tune2fs -l /dev/sdbX | grep Max
Maximum mount count:      -1

From the above outputs we can establish the following information summary. The /dev/sdbX filesystem was last checked on Sun Dec 13 09:14:22 2015. Since the last check, this filesystem was mounted 157 times and maximum amount of mounts before next filesystem fsck check. In the above case the value -1 means that fsck is disabled.

Now, that we have learned about some tune2fs basics let’s discuss PASS system configuration option found in /etc/fstab file containing all on boot mountable partitions and their relevant mount options.

# blkid | grep sdb1
/dev/sdb1: UUID="c6e22f63-e63c-40ed-bf9b-bb4a10f2db66" TYPE="ext2"
# grep c6e22f63-e63c-40ed-bf9b-bb4a10f2db66 /etc/fstab
UUID=c6e22f63-e63c-40ed-bf9b-bb4a10f2db66 /mnt            ext2    errors=remount-ro 0      0

We have used blkid command to retrieve UUID for a given partition and then used the retrieved partition UUID to get a relevant information related to /dev/sdb1 partition from /etc/fstbab. The last column that is a column 6, aka fsck PASS column is used by fsck to determine whether fsck should check filesystem before it is mounted and in which order given partitions in /etc/fstab should be checked. Possible entries for fstab PASS column are 0,1 and 2.

  1. 0 - disabled, that is do not check filesystem
  2. 1 - partition with this PASS value has a higher priority and is check first. This value is usually set to root / partition
  3. 2 - partitions with this PASS value will be checked last

The connection between fstab PASS value, last checked value and number of mounts value is as follows:
During the system boot the first value which is checked is fstab PASS value. If this value is 0 that not other values are checked ( exemption .. see “Force fsck for root partition” below ) and the fsck will NOT perform filesystem check. If the PASS value found in /etc/fstab is any other than 0, that is 1 or 2 then values of maximum mounts and total mounts are checked. If the value of maximum mounts is greater or equal to total number of mounts value then fsck’s filesytem check will be performed. Few examples:

FSCK DISABLED
fstab PASS: 1
Maximum mount count:      -1
Mount count:              157
----
FSCK DISABLED
fstab PASS: 0
Maximum mount count:      -1
Mount count:              157
----
FSCK ON NEXT REBOOT
fstab PASS: 1 or 2
Maximum mount count:      1
Mount count:              157
----
FSCK DISABLED
fstab PASS: 0
Maximum mount count:      1
Mount count:              1
----
FSCK ON NEXT REBOOT
fstab PASS: 1 or 2
Maximum mount count:      1
Mount count:              1
----
NO FSCK ON NEXT REBOOT
fstab PASS: 1 or 2
Maximum mount count:      200
Mount count:              157
Related Posts:

Social Profiles

This web accept cryptocoin donations
BTC address, LTC, ETH, DASH, Uphold:
Why donations?